Executing and Saving Effects
Saving Effects
When you recall another effect, the current effect is automatically saved in
the currently recalled register. In place of this automatic saving, it is also
possible to save an effect in a specified register.
Saving an effect in a specified register
Use the following procedure.
1
2
3
8-30
Chapter 8 Key Frame Effects
In the numeric keypad block, press the STORE/LEARN button, turning
it on.
Enter the register number in which you wish to save the effect.
To save the effect in the first empty register after the currently recalled
register, enter a period only.
Press the ENTER button.
This saves the current effect in the specified register.