Ptz Control - Samsung SVR1620 User Manual

Hide thumbs Also See for SVR1620:

Table of Contents

2-12. PTZ CONTROL

① Select a pre-set single camera, and then press the PTZ button to control pan, tilt and zoom

functions.

② Press the PAN(COPY) button, and then turn the SHUTTLE ring and JOG dial to pan left and

right.

③ Press the TILT(FREEZE) button, and then turn the SHUTTLE ring and JOG dial to tilt up and

down.

④ Press the ZOOM(SPOT) button, and then turn the SHUTTLE ring and JOG dial to zoom

near and far.

⑤ If required, press the FOCUS(AUTO) button, and then turn the SHUTTLE ring and JOG dial

to obtain the clearest picture.

⑥ Press the PRESET(SEARCH) button, and select the channel button to call the preset

position number. ⑦ Press the PTZ button again to exit the PTZ mode.

PRESETS

A preset is a user-defined camera position using pan and tilt, zoom, and focus Commands. SVR-1620 has

Programming capacity for 16 preset locations.

(Please refer to 1-6-1. PTZ PRESET SETUP for more information in the main menu setup, p.36)

PTZ function can be available for the Dome camera from Samsung Techwin's SPD-2500, SPD-1600, SRX-100B.

DIGITAL VIDEO RECORDER

OPERATION

Table of Contents