Table of Contents
Advertisement
1
Listing and Code Approvals
A. Appliance Certification
Model CB1200 Pellet Insert
Laboratory OMNI Test Laboratories, Inc.
Safety
061-S-13-2
Report No.
Solid Fuel Room Appliance/Pellet Fuel
Type
Burning Type Insert
ASTM E1509-95, UL127, ULC S628-
93, ULC S610-M87, and ULC/ORD-
C1482-M1990 Room Appliance Pellet
Standard
Fuel Burning Type, (UM) 84-HUD.For
use only with palletized wood or shelled
field corn fuel. Mobile Home Approved
This pellet insert needs periodic inspection and repair for proper operation. It is against federal regulations to operate this
pellet insert in a manner inconsistent with operating instructions in this manual.
NOTE: This installation must conform with local codes. In the absence of local codes you must comply with the ASTM
E1509-95, UL127, ULC S628-93, ULC S610-M87, ULC/ORD-C-1482-M1990, (UM) 84-HUD
June 4, 2019
The Classic Bay 1200 insert is
Certified to comply with 2020
particulate emission standards.
7027-805C
B. BTU & Efficiency Specifications
Emissions Report #: 0061PN013E
EPA Certification #: 171-19
EPA Certified Emissions: 0.8 grams per hour
*LHV Tested Efficiency: 67.6%
**HHV Tested Efficiency: 63.6%
***EPA BTU Output: 10,200 to 33,900 / hr.
****BTU Input: 17,000 to 48,500 / hr.
Vent Size: 3, 4 "L" or "PL", or 6"
Hopper Capacity: 75 lbs.
Fuel Premium Wood Pellets
*Weighted average LHV (Low Heating Value) efficiency
using data collected during EPA emissions tests.
**Weighted average HHV (High Heating Value) efficiency
using data collected during EPA emissions tests.
***A range of BTU outputs based on HHV and the burn
rates from the low and high EPA tests.
****Based on the maximum feed rate per hour multiplied
by approximately 8600 BTU's which is the average BTU's
from a pound of pellets.
‡ Grade of pellet fuel as certified by Pellet Fuels Institute (PFI), ENPlus
or CANplus.
CB1200 Pellet Insert
7
Advertisement
Table of Contents
