Table of Contents
Advertisement
CB1200-I Pellet Insert
1
Listing and Code Approvals
A. Appliance Certification
MODEL:
1200-I Pellet Insert
LABORATORY: OMNI Test Laboratories, Inc
REPORT NO.
061-S-1-2
TYPE:
Solid Fuel Room Heater/Pellet Type
Insert
STANDARD:
ASTM E1509, ULC S628 and ULC/
ORD-C1482 Room Heater Pellet Fuel
Burning Type and (UM) 84-HUD, Mobile
Home Approved
B. Mobile Home Approved
This appliance is approved for mobile home installations
when not installed in a sleeping room and when an outside
combustion air inlet is provided. The structural integrity of
the mobile home floor, ceiling, and walls must be maintained.
The appliance must be properly grounded to the frame of
the mobile home and use only listed pellet vent, Class "L" or
"PL" connector pipe. A Quadra-Fire Outside Air Kit must be
installed in a mobile home installation.
C. Glass Specifications
This appliance is equipped with 5mm ceramic glass. Replace
glass only with 5mm ceramic glass. Please contact your
dealer for replacement glass.
NOTE: This installation must conform with local codes.
In the absence of local codes you must comply with the
ASTM E1509, (UM) 84-HUD, ULC/ORD-C-1482
D. Electrical Rating
115 VAC, 60 Hz, Start 4.1 Amps, Run 1.1 Amps
Page 4
E. BTU & Efficiency Specifications
Emissions Rating:
*BTU Output:
Heating Capacity:
Hopper Capacity:
Fuel:
Shipping Weight:
*BTU output will vary, depending on the brand of fuel you
use in your appliance. Consult your Quadra-Fire dealer
for best results.
NOTE: Hearth & Home Technologies, manufacturer of
this appliance, reserves the right to alter its products,
their specifications and/or price without notice.
7014-083C
.9 grams/hr
14,000 - 40,000 / hr
up to 2,500 sq. ft.
60-75 lbs
Wood Pellets or Shelled Corn
24 lbs
October 26, 2006
R
Advertisement
Table of Contents
