Connected - Samsung AMxxxJXV Series Installation Manual

Installing the distribution header
1.
Pipe*
To outdoor unit
Socket
<Liquid side>
Pipe : Separately purchased item
2. If the number of connected indoor unit is fewer than ports on the distribution header, block the unused
ports with caps.
Welding part
Provided
Connect
item
in order
<Liquid side>
Connect the distribution header to the connection pipe with the provided reducer.
NOTE
Cut the provided socket, according to the diameter of the connection pipe, before connecting it.
Connect the indoor units in order, while respecting the direction of the arrow shown in the
illustration.
CAUTION
When indoor units are connected to same distribution head, indoor unit must be connected in order
of their capacity, from largest to smallest.
Provided item
Socket
Pipe*
Pipe*
To indoor unit
To outdoor unit
Case of blocking the unused
distribution header ports
To indoor unit
Socket
<Gas side>
Connect
in order
Case of blocking the unused
distribution header ports
<Gas side>
Socket
Pipe *
63