Roll Paper Specifications - Oki Pro1040 Maintenance Manual

Specifications

Roll Paper Specifications

„ Continuous paper (normal printing)
Winding direction
Paper weight
Roll core
Outer diameter
Other W2 : Paper width
L2 : Paper length
L4 : Cut size when in cut mode
L5 : Upper edge cutting margin
L6 : Lower edge cutting margin
A : Top margin
B : Bottom margin
C : Left margin
D : Right margin
C
W2
- 106 -
Printing range
D
Outside winding: Printable surface faces out.
Inside winding: Printable surface faces in
0.07 to 0.25 mm (0.003 to 0.0098 inches)
Inner diameter: 76.2 mm (3 inches)
203.2 mm (8 inches) or less
25.4 to 130 mm (1 to 5.12 inches)
12.7 to 1320.8 mm (0.5 to 52 inches)
101.6 mm (4 inches) or more
However, if the length of one label is less than 101.6 mm
(4 inches), then the shortest length is 101.6 mm
(4 inches) as multiple sheets are cut
2.12 mm (0.0835 inches)
2.12 mm (0.0835 inches)
2.12 mm (0.0835 inches) or more
2.12 mm (0.0835 inches) or more
2.12 mm (0.0835 inches) or more
2.12 mm (0.0835 inches) or more