Paper Installation - Oki LD630T User Manual

3-3 Paper Installation

1) Open the Paper Cover.
Paper Cover
3) Open the Ribbon Assembly and then pull the paper so that it extends out of the front
of the printer. Push the paper under both of the Paper Guide.
* Whether the paper label is wound inwards or outwards, its printing surface must
face up.
Ribbon Assembly
4) If you use Black-Mark or Notch paper roll, please lift up the paper and match the
sensor position adjust the black mark or notch hole.
Moveable Black-Mark Sensor
and Notch Sensor
5) Close the Ribbon Assembly until a click sound is heard, close the Paper Cover.
Rev. 1.0
2) Spread the Paper Holder and insert
paper roll.
●
●
- 15 -
LD630T/LD640T
Paper Holder
Paper Guide