Adjusting The Print Position On The Paper; Using The Roll Paper - Oki Pro1040 User Manual

Adjusting the Print Position on the Paper

⿟

Adjusting the Print Position on the Paper

You can correct the print start position vertically and horizontally on the paper by the printer settings.
Please refer to the following procedure.

Using the roll paper

Paper feed
direction
1
Press the <Fn> key.
The numerical values input screen will
be displayed.
2
Press <2>, <2>, <0> (function
numbers), and then press the <OK>
button.
3
Press the scroll button
item you want to adjust.
4
Press the <OK> button.
5
Press the scroll button
amount of the adjustment, and then press
the <OK> button. Confirm there is a check
mark ( ) to the left of the selected value.
Note
z Y represents the paper feed direction and X represents the
orthogonal position relative to the paper feed direction.
z Set positive [+] numbers to widen the blank space in the
X direction, and also set positive [+] numbers to widen
the blank space in the Y direction.
z Readjustment might be necessary depending on the usage
conditions (temperature, humidity, media type).
z By eliminating the differences between printers and using
the same settings on all the printers with this procedure,
you can use one computer when you want to get the
same print results on multiple printers. Refer to
the Printer Driver to Fine-tune the Print Position" (P.16)
about setting the computer.
- 84 -
or to select the
or to select the
"Using