Operational Instructions - Stamina Magnetic Resistance Recumbent Bike 15-4760 Owner's Manual

OPERATIONAL INSTRUCTIONS

USING THE METER
POWER ON :
Pedal movement or push the MODE button.
POWER OFF :
Automatic shut off after four minutes of
inactivity.
MODE BUTTON:
Press to select display functions, include SCAN, TIME, SPEED,
DISTANCE, CALORIES, and HEART RATE.
Press and hold for three seconds to reset all functions to zero.
FUNCTIONS:
SCAN: Automatically scans each function of TIME, SPEED, DISTANCE, CALORIES, and HEART
RATE in sequence with change every four seconds. Press and release the MODE button
until "SCAN" appears on the display.
Displays the time from one second up to 99:59 minutes.
TIME:
Displays the current speed from zero to 999.9 miles per hour.
SPEED:
Displays the distance from zero to 99.99 miles.
DISTANCE:
Displays the calorie consumption from zero to 999.9 Kcal.
CALORIES:
The calorie readout is an estimate for an average user. It should be used only as a
comparison between workouts on this unit.
Displays your heart rate in beats per minute. To display heart rate, select the HEART
HEART RATE:
RATE MODE and grasp the Pulse Sensors on the handlebars, one in each hand. The heart
symbol "
will be displayed approximately five (5) seconds after the heart icon is displayed. If you do
not place your hands correctly and 60 seconds passes without a heart rate reading, the
meter will turn off the heart rate circuit. If this occurs, press the MODE button to restart,
place your hands back on the Pulse Sensors correctly, and the heart rate readout will
appear.
NOTE: The meter will shut off automatically after four minutes of inactivity. All function values will
be kept. Push the MODE button and hold it down for three seconds to reset all functions
to zero.
HOW TO INSTALL AND REPLACE BATTERIES:
1. Dismount the meter from the METER POST(28).
2. Open the Battery Door on the back of the meter.
3. The meter operates with four AA batteries, four batteries included.
Refer to the illustration to install or replace the batteries.
4. Attach the meter back to the METER POST(28).
NOTE:
1. Do not mix a new battery with an old battery.
2. Use the same type of battery. Do not mix an alkaline battery with
another type of battery.
3. Rechargeable batteries are not recommended.
" will begin flashing when the meter senses your heart rate. Your heart rate
11
AA Batteries