Seat Adjustment - Stamina Magnetic Resistance Recumbent Bike 15-4760 Owner's Manual

OPERATIONAL INSTRUCTIONS

SEAT ADJUSTMENT

Proper seat adjustment is important.
1. Loosen the ADJUSTMENT KNOB(45) and slide the REAR FRAME(3) to adjust the seat. Tighten the
ADJUSTMENT KNOB(45) after adjusting the seat to a new position.
2. Sit on the seat and place your feet on the pedals. You should be able to move through a complete pedal
stroke without locking your knees or shifting your hips on the seat. The seat is too close to the pedals if
you have more than a slight bend in your knees at the bottom of the pedal stroke. The seat is too far from
the pedals if you have to completely straighten your knees at the bottom of the pedal stroke.
CAUTION:
1. Do not attempt to adjust the seat while you are on the R360s RECUMBENT BIKE
2. Always tighten the
LOAD ADJUSTMENT
To increase the load, press the UP BUTTON(37). To decrease the load, press the DOWN BUTTON(38).
ADJUSTMENT KNOB(45)
Down Button(38)
after adjusting the seat to a new position.
Up Button(37)
12
.