Table of Contents
Advertisement
20
3.
Open the oven door and place a tea towel on the
door.
Remove both screws (M4) in openings 1 and 4
from their position on the right hand side of the
control panel. Then remove the two function
selector screws.
4.
Grip the panel with both hands and slowly pull it
upwards. Take it out of its fastening brackets and
then remove it carefully. Caution: do not damage
the cable. The connections must not come loose.
5.
Allow the panel to hang down at one side.
6.
Unscrew the control panel support.
Hide quick links:
Advertisement
Table of Contents
