Table of Contents
Advertisement
Note:
Parts for gas
conversion
16
After the conversion, make sure that you take the
sticker indicating the type of gas specification from the
cover and attach it to the rating plate over the existing
table.
Enter the new type of gas and new gas pressure in
the table. Observe the "Important information"
sections.
See below for pictures of the parts required.
The correct nozzle diameter is indicated in the
"Technical data - Gas" table.
Always use a new seal.
The gas connecting pieces may vary according to
type of gas and country requirements.
Burner nozzle
Seal
Connecting piece for ISO 7 1
Connecting piece for natural gas (NG: G20)
Hide quick links:
Advertisement
Table of Contents
