The Color Led Flashes And Operation Stops - Roland CAMM PRO PC-60 User Manual

5 Installing a Ribbon Cartridge

The COLOR LED Flashes and Operation Stops...

The COLOR LED and a CARTRIDGE HOLDER LED flash at the same time
The ink ribbon has been used up. Follow the steps below to replace with a new ribbon cartridge.
1
Operation stops when the ink ribbon runs out.
If this happens, the COLOR LED and the CAR-
TRIDGE HOLDER LED corresponding to the
cartridge that has run out of ink ribbon flash at the
same time.
Example:
In this case, the cartridge installed
at "2" has run out of ink ribbon.
3
Printing resumes when the front cover is closed.
Only the COLOR LED flashes
A ribbon cartridge of the color selected for the driver is not loaded. Install a ribbon cartridge of the driver-specified color.
28
2
Open the front cover and replace with a new
ribbon cartridge of the same color.
Used-up
ribbon
cartridge
* When a cartridge of a different color is installed, the
COLOR LED flashes and printing is not resumed.
New
ribbon
cartridge