Powering Off - Roland CAMM PRO PC-60 User Manual

11 Powering Off

11 Powering Off
When not in use for prolonged
periods, unplug the power cord from
the electrical outlet.
Failure to do so may
result in danger of
shock, electrocution,
or fire due to
deterioration of the
electrical insulation.
NOTICE
Do not switch off the main power while printing is in progress. Doing so causes the
printing head to remain in contact with the sheet, which may damage the head.
When switching off the main power, use the
gone out, and then switch off the main power.
When the unit is not in use, keep the pinch rollers raised. The pinch rollers may be deformed if left engaged.
Before unplugging the power cord, make sure the sub power switch and the main power switch have both been
turned off.
Power Off in Daily Operation
1
Make sure the sheet loading lever has
been raised.
When Not Use for a Prolonged Period
1
Hold down the
on the control panel until
the LED
starts to
flash, and
switch off
the sub power.
34
2
key
Make sure the flashing POWER LED
has gone out, then switch off the main
power.
Press the side of
the switch marked
with "
key to turn off the sub power, make sure the POWER LED has
2
Hold down the key on the control panel until the LED starts
to flash, and switch off the sub power.
* In everyday use, the
main power is
normally always left
on and not switched
off.
".
The sub power auto-
matically switches off
when an hour elapses
with no operation being
performed.
3
Unplug the power
cord from the
electrical outlet.