Table of Contents
Advertisement
1. Safety Information for This Machine
Safety Information
Safety During Operation
In this manual, the following important symbols are used:
Operators of This Machine
This machine is very dangerous because it has moving parts that pose hazards of collisions and pinching, parts that
reach high temperatures, and a device that emits UV light. Before using this machine, fully understand its hazards
and undergo appropriate training for safe usage.
People who do not understand the machine's hazards or who have not undergone training are prohibited from
using the machine.
In this manual, people who have undergone appropriate training and fully understand the hazards of this machine
are referred to as "certified operators."
Area Limitation within the Movable Range
People other than certified operators are prohibited from approaching this machine.
Limit the area around this machine to prevent people who have not undergone appropriate training from
approaching this machine.
Explicitly state that the area around this machine is off limits by isolating it through an installation in a dedicated
room with a locked door or by installing a safety fence around this machine's perimeter.
1. Front: 150 cm (59.1 inches) or more
2. Right and left: 100 cm (39.4 inches) or more
3. Rear: 100 cm (39.4 inches) or more
4. Depth: 500 cm (197 inches) or more
5. Width: 700 cm (276 inches) or more
4
Indicates a potentially hazardous situation which, if instructions are not followed,
will result in death or serious injury.
Indicates a potentially hazardous situation which, if instructions are not followed,
could result in death or serious injury.
Indicates a potentially hazardous situation which, if instructions are not followed,
may result in minor or moderate injury or damage to property.
Advertisement
Table of Contents
