Defining Sntp Interfaces - Dell PowerConnect 54 Series User Manual

The following is an example of the CLI commands:
console> enable
console# configure
Console(config)# sntp server 100.1.1.1 poll key 10
Console# show sntp status
Clock is synchronized, stratum 4, reference is 176.1.1.8
Reference time is AFE2525E.70597B34 (00:10:22.438 PDT Jul 5 1993)
Unicast servers:
Server
---------
176.1.1.8
176.1.8.179 Secondary
Anycast server:
Server
-------
VLAN 119
Broadcast:
Interface
----------- -----------
176.1.1.8
176.1.8.179 Secondary

Defining SNTP Interfaces

The SNTP Broadcast Interface Table contains fields for setting SNTP on different interfaces. To open the
SNTP Broadcast Interface Table, click System→ SNTP→ Interfaces Settings.
88
Configuring System Information
Preference Status
---------- --------
Primary Up
Unknown
Preference Status
---------- -------
Secondary Up
IP address Last response
------------------------
Primary AFE252C1.6DBDDFF2
AFE21789.643287C9
Last response
---------------
AFE252C1.6DBDDFF2 7.33
AFE21789.643287C9 8.98
Last response
--------------
19:53:21.789 PDT
Feb 19 2002
Offset Delay
[mSec] [mSec]
------ ------
117.79
189.19
Offset Delay
[mSec] [mSec]
----- ------
7.19 119.89