Defining Iscsi Sessions Using Cli Commands - Dell PowerConnect 54 Series User Manual

Defining iSCSI Sessions Using CLI Commands

The following table summarizes the equivalent CLI commands for defining fields displayed in the iSCSI
Sessions page.
Figure 6-100. iSCSI Sessions CLI Commands
CLI Command
show iscsi sessions
[detailed]
The following is an example of the CLI commands:
Console# show iscsi sessions
iSCSI enabled
iSCSI vpt: 5, remark
Session aging time: 60 min
Maximum number of sessions: 256
iSCSI targets and TCP ports:
---------------------------
TCP Target IP
Port Address
----- ---------
860
3260
5000
30001 172.16.1.1
vendor:diskarrays.sn.45678.tape:sys1.xyz
30033 172.16.1.10
30033 172.16.1.25
Description
To display the iSCSI sessions, use the show iscsi sessions
privileged EXEC command.
Name
----
iqn.1993-11.com.disk-
Configuring System Information
213