Configuring General Device Tuning Parameters
The General Settings page provides information for defining general device parameters. To open the
General Settings page, click System
Figure 6-93. General Settings
•
Attribute — The general setting attribute.
•
Current — The currently configured value.
•
After Reset — The future (after reset) value. By entering a value in the After Reset column, memory is
allocated to the field table.
•
Max RAM Log Entries (20-400) — The maximum number of RAM Log entries. When the Log entries
are full, the log is cleared and the Log file is restarted.
•
Jumbo Frames — Enables or disables the Jumbo Frames feature. Jumbo Frames enable the
transportation of identical data in fewer frames. This ensures less overhead, lower processing time, and
fewer interrupts.
Viewing RAM Log Entries Counter Using the CLI Commands
The following table summarizes the equivalent CLI commands for setting fields displayed in the General
Settings page.
Table 6-46. General Settings CLI Commands
CLI Command
logging buffered size number Sets the number of syslog messages stored in the
port jumbo-frame
The following is an example of the CLI commands:
Console (config)# logging buffered size 300
206
Configuring System Information
→
Advanced Settings
Description
internal buffer (RAM).
Enables jumbo frames for the device.
→
General in the tree view.