Table of Contents
Advertisement
4-2 Setting the Print Start Position
2.
Bring the media sensor close to the media front edge.
Media sensor
Media sensor
3.
Set the front edge position of the media.
Media sensor
60
Chapter 4: Feature Reference
Media
Detection
position
Media
Table
Detection
position
Media
Table
Press
to lower the lifter so that it is close the
upper edge of the media.
Press
to move the table toward the front end
until the media sensor detects the media.
When the sensor detects the media, the [
changes to black.
Press
to move the table toward the back end.
] mark
Advertisement
Table of Contents
