Setting The Media - Roland FLATJET FLJ-300 User Manual

2-2 Setting the Media

Set the media by aligning the corner of the media to the position on the table indicated in the figure.
Alight the right edge of the media to the table edge and the top edge to the mark line.
Printer rear view
Table front edge
Media Not Suitable for Printing
The following types of media are not suitable for printing.
Media that is bent or media that easily winds up.
Media whose surface is extremely uneven.
Media whose thickness is not uniform
CAUTION Be sure to follow the procedure exactly and only touch the specified locations.
Otherwise sudden movement of the machine may cause injury.
Printer rear panel
Table
Origin
Mark line
The origin for printing. Align
the corner of the media here.
Media
Chapter 2: Operation 27