Table of Contents
Advertisement
4-2 Setting the Print Start Position
4.
Bring the media sensor close to the media upper edge.
Media sensor
5.
Enter the media thickness.
62
Chapter 4: Feature Reference
Media
Press
to move the lifter away from the media up-
per edge by a small distance.
Check that the [
] mark on the screen is white.
Press
to move the lifter closer to the media up-
per edge until the sensor detects the media.
When the sensor detects the media, the [ ] mark
changes to black.
Press
to move the table toward the upper edge.
Press [JOG].
Advertisement
Table of Contents
