Roland VersaUV LEF2-200 Setup Manual page 8

Hide thumbs Also See for VersaUV LEF2-200:
Table of Contents

Advertisement

To Ensure Safe Use
Connect to an electrical outlet that com-
plies with this machine's ratings (for volt-
age, frequency, and current).
Incorrect voltage or insufficient current may
cause fire or electrical shock.
If sparking, smoke, burning odor, unusual
sounds, or abnormal operation occur, im-
mediately unplug the power cord. Never
use if any component is damaged.
Continuing to use the machine may result in
fire, electrical shock, or injury. Contact your
authorized Roland DG Corporation dealer.
Never use outside or in any location where
exposure to water or high humidity may
occur. Do not touch the power cord, plug,
or electrical outlet with wet hands.
Doing so may result in fire or electrical shock.
Never allow any foreign object to get in-
side. Never expose the machine to liquid
spills.
Inserting objects such as coins or matches or
allowing beverages to be spilled into the ven-
tilation ports may result in fire or electrical
shock. If anything gets inside, immediately
disconnect the power cord and contact your
authorized Roland DG Corporation dealer.
Never place any flammable object nearby.
Never use a combustible aerosol spray
nearby. Never use in any location where
gases can accumulate.
Combustion or explosion could occur.
Handle the power cord, plug, and electrical
outlet correctly and with care. Never use
any article that is damaged.
Using a damaged article may result in fire or
electrical shock.
When using an extension cord or power
strip, use one that adequately satisfies the
machine's ratings (for voltage, frequency,
and current).
Use of multiple electrical loads on a single
electrical outlet or of a lengthy extension
cord may cause fire.
1.Introduction
6
Danger of electrical short, electrical shock, or fire
WARNING
WARNING
Position so that the power plug is within
immediate reach at all times.
This is to enable quick disconnection of the
power plug in the event of an emergency. In-
stall the machine next to an electrical outlet.
Also, provide enough empty space to allow
immediate access to the electrical outlet.
For accessories (optional and consumable
items, power cord, and the like), use only
genuine articles compatible with this ma-
chine.
Incompatible items may lead to an accident.
Do not use the supplied power cord for
other products.
If the machine will not be used for a long
period, disconnect the power cord.
This prevents an accident caused by unex-
pected electric leakage or unintentional start
of the machine.
Connect to ground.
This can prevent fire or electrical shock due
to current leakage in the event of malfunc-
tion.
Never use the machine for any purpose
for which it is not intended, or use the ma-
chine in an excessive manner that exceeds
its capacity.
Doing so may result in injury or fire.

Advertisement

Table of Contents
loading

Table of Contents