5.1.1.2
Software Upgrade via Local Device
This item is used for updating the DVR-4TH/ 8TH/ 16TH series unit software
by local device. The menu is displayed as follows.
Connect a USB drive that contains the upgrade software to the unit; the
upgrade files that are available will then be listed in the menu. To update the
system, select a file and use UP / DOWN keys to choose <Yes>. Press
ENTER to confirm the selection and start the upgrade process. The
DVR-4TH/ 8TH/ 16TH series unit uploads the software, updates the system
files, and reboots automatically.
The upgrade process may take several minutes to complete. After rebooting
the unit, please check the software version again.
5.1.1.3
Software Upgrade via Internet
This item is used to upgrade the unit's software via the internet. Select one of
the listed software versions and choose <Yes>. The DVR-4TH/ 8TH/ 16TH
series unit uploads the software, updates the system files and reboots
automatically.
DVR-4TH/8TH/16TH Series
SPECO TECHNOLOGIES 07/10
Software Upgrade via Local Device
Upgrade Version
xxxx-xxxx-xxxx-xxxx
NOTE: If you want to upgrade your unit with a USB ThumbDrive
contains the newest software, make sure the software you want to use
to update the unit should be fold into a folder named "upd_200s",
otherwise, the unit cannot recognize it.
NOTE: Power interruption cannot occur during the software upgrade
process. Ensure that no power interruption can happen until the unit is
completely rebooted.
NOTE: Do not remove the external USB ThumbDrive
before the unit has completely shut down (hard drive and fan are off).
Removing the external USB ThumbDrive
can cause the system to update improperly.
User's Manual
Select
No
®
®
/DVD+RW before shut down
®
/DVD+RW
63