Calling Preset Points - Speco 16TH User Manual

User's Manual
• Press 1 to access the Set/Go Preset function. A virtual keyboard will be
displayed as below.
• Input a desired preset number.
• Click on the <Set Preset> button to save the position. Now the preset
position is set and ready to be called.
4.6.6

Calling Preset Points

Follow these steps to call preset points.
• Press a Channel key to view the corresponding camera in full screen.
• Then press DOME to enter dome control mode. Then a Hint Screen,
shown as blow figure, will display on the screen.
• Press 2 to hide the dome control Hint Screen; press 2 again to toggle the
Hint Screen.
• Press 1 to access the Set/Go Preset function.
• Input a desired preset number.
• Click on the <Go Preset> button to call the preset point.
• Now the selected dome camera will rotate to the preset position
automatically.
56
1 2
4 5
7 8
0
1 2
4 5
7 8
0
3 BS
6 Set Preset
9 Go Preset
Clear Exit
3 BS
6 Set Preset
9 Go Preset
Clear Exit
DVR-4TH/8TH/16TH Series
SPECO TECHNOLOGIES 07/10