Device Setup; Activated; Status - Speco 16TH User Manual

IP Dome Protocol
If the connected device is an IP Dome Camera, then select an appropriate IP
Dome Protocol from the provided options.
3.6.3

Device Setup

Enter <Device Setup> to configure the basic settings of the IP camera. The
basic settings include the IP camera's product name, image quality, image
adjustment, etc. Set the item <Apply> to <Yes> to apply the changes.
3.6.4

Activated

Access this item and select <Yes> to activate the connection to the IP camera.
To deactivate the connection, select <No>.
3.6.5

Status

After the connection to the IP camera is activated, users can check the
connection status. The menu will be shown as below.
The information shown on the monitor is "read only".
DVR-4TH/8TH/16TH Series
SPECO TECHNOLOGIES 07/10
NOTE: The <Device Setup> menu may have fewer or more menu
items according to different IP camera models.
NOTE: Once the connection to the IP camera is activated, menu items
<Hostname/IP>, <Model>, and <Connection Setup> will be grayed out
and cannot be accessed.
Model
Streaming Format
Resolution
PPS
Bandwidth
Pkg. lost rate
Status
User's Manual
****
MPEG4
640x480
10
20 KB/Sec
0.1%
33