Event Setup; Internal Buzzer; Event Icon; Email Notice - Speco 16TH User Manual

User's Manual
5.6

Event Setup

This menu allows the user to determine DVR-4TH/ 8TH/ 16TH series
behavior in response to an alarm event. In the Main menu, move the cursor to
<Event Setup> and press ENTER. The following menu is displayed.
5.6.1

Internal Buzzer

This item allows user to enable / disable the DVR-4TH/ 8TH/ 16TH series
internal buzzer. If set to <ON>, the buzzer is activated in response to an alarm.
If set to <OFF>, the buzzer is not activated. The default setting is <ON>.
5.6.2

Event Icon

This item enables (ON) / disables (OFF) the display of an Event Icon on the
main monitor when an alarm event occurs. The default setting is <ON>
(enable). The event types are represented by a character respectively; the
descriptions are listed in the following table.
5.6.3

Email Notice

The item enables (ON) / disables (OFF) the Email notification of an event.
When an alarm event is triggered and <Email Notice> is enabled, an e-mail
concerning the alarm event will be sent. The default setting is <OFF>.
108
Internal Buzzer
Event Icon
Email Notice
Email Attachment
Alert Notification Setup
Event Full Screen
Event Duration
Per Channel Config
Event type Description
A Alarm in event
Motion detection event
M
Video loss event
L
NOTE: In order to send an event notification e-mail successfully,
ensure that the unit connects to the Internet.
Event Setup
ON
ON
OFF
OFF
None
20 Sec
DVR-4TH/8TH/16TH Series
SPECO TECHNOLOGIES 07/10