Software Upgrade - Speco D4VN User Manual

Item
Export To
USB
Import From
USB
Load Default
Load Factory
Default
Software
Upgrade

4-9-1. Software Upgrade

1. In the USB flash drive root directory, create a new folder named "upgrade"
2. Create sub-folder for each model under "upgrade" folder and copy each software file to their folder.

"d4vn" for D4VN: "main_d4vn_speco_*.*.*_202****"

"d8vn" for D8VN: "main_d8vn_speco_*.*.*_202****"

"d16vn" for D16VN: "main_d16vn_speco_*.*.*_202****"
3. Plug in the USB flash drive.
4. Navigate to Config menu of Setup.
5. Select Software Upgrade.
6. Follow the procedure from Figure 4.9.2 to Figure 4.9.5.
Table 4.9.1. Configuration Setup
User can save the current configuration (Setting values) of the DVR to the
USB flash drive. Plug in the USB flash on the front panel and press the
button to start the saving process.
User can upload the configuration of the DVR to another DVR using the USB
Flash drive. Plug in the USB flash drive on the front panel and press the
button to start the loading process.
Press the button to reset the system to the default settings.
The following settings such as Language, DVR ID, Security User
Authentication, Security User P/W, Date Format, DLS settings, Network
settings, HDD overwrite, Limit recording, HDD serial number, and HDD
ERROR time will not be included.
Press the button to reset the system to the factory default settings.
Upgrade softeware to the latest version.
After connecting USB flash drive to USB port on the DVR, click SEARCH.
It will automatically find the upgrade file.
Description
43