Jet JTS-315LA Operating Instructions Manual page 76

Test Report No.: No.: 17706687 001
Part II of II
Requirement  Test
Clause
cord
Glands used as cord anchorage
Testing for suitability of flexible cable or cord
Push test ................................................................... :
Pull test ..................................................................... :
Torque test................................................................ :
Displacement of the flexible power cord or cable
after testing
Damaging of the flexible power cord or cable after
testing
Testing of cord anchorage ....................................... :
Damaging of cord anchorage after testing
Creepage and clearance distances ......................... :
23.6 Protection of excessive bending for flexible cables
or cords of tools
Cable or cord for type X attachment
Fixing of guard
Testing of cord guard ............................................... :
23.7 Inlet openings for external wiring
Ageing of bushing material, prevention of
damaging of the cable or cord
Fixing of inlet bushings
Bushings in metal enclosure of class II tools
Bushings in metal enclosure of other tools
23.8 Spacing for the power supply cord inside the tool
Covers giving access to the terminals of the power
supply cord
Class I tools with cords for type X attachment and
all class II tools
Testing for tools with type X attachment ...................
24 TERMINALS FOR EXTERNAL CONDUCTORS
24.1 Means of connection for terminals
Page 36 of 63
EN 61029-1:2009+A11
Result - Remark
External conductors will be
connected to the plug fixed on
the machine frame through a
connector provided by end
Verdict
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
P
N/A
P
N/A
P
N/A
N/A
N/A
N/A
N/A
N/A