Load Menu From Usb; Save Menu To Usb - TurboChef Eco Service Manual

20 INFO MODE

Load Menu from USB

NOTE: To update a menu, you may need to verify
that access to the Load Menu screen is turned on.
See page 13 for details.
USB Setup: When loading from USB, the menu
must be in BIN (binary) format. The files must
be loaded on the root of the USB. To obtain the
proper binary file, contact your menu administrator,
TurboChef Technical Support, or consult your
ChefComm Pro® instructions.
To load a menu to the oven,
1. When the oven is off or cooling down, insert
the USB. The oven will automatically detect the
device. Touch "OK" to proceed.
Figure 35: Insert USB
2. Load the menu:
a. Touch "Load Menu to Oven."
Figure 36: USB Screen - Load Menu to Oven
b. Touch "OK" to confirm the selection and
begin the installation.
Figure 37: Load Menu to Oven Confirmation Screen
c. If multiple menus are on the USB, the oven
will display the menu names. Touch the
menu to load. If only one menu file is on
the USB, this step will be bypassed.
3. Once installation is complete, the oven will
display "Installation Complete." Remove the
USB and return the oven to service.
Figure 38: Installation Complete

Save Menu to USB

If desired, name the menu from the Menu Info
screen to make it easy to find on your USB drive.
See page 13.
1. When the oven is off or cooling down, insert
the USB (see figure 35, adjacent). The oven will
automatically detect the device. Touch "OK" to
proceed.
2. Touch "Save Menu to USB."
Figure 39: USB Screen - Save Menu to USB
3. Touch "OK" to save the menu to the USB.
Touch "CANCEL" to go back to the previous
screen.
Figure 40: Save Menu Confirmation Screen