Removing The Top I/O-Panel; Prerequisites; Procedure - Dell XPS 8930 Service Manual

WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your
your computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Topics:
•

Prerequisites

•

Procedure

Prerequisites
1 Remove the right-side cover.
2 Remove the front bezel.
3 Remove the top cover.
4 Follow the procedure from step 1 to step 2 in
Procedure
1 Disconnect the top I/O-panel cables from the system board.
For more information, see
2 Note the I/O-panel cables routing and remove them from the routing guides next to the system board on the chassis.
3 Remove the cables through the slot at the top of the chassis.
computer. After working inside your computer, follow the instructions in
"Removing the power-supply
"System-board components".

Removing the top I/O-panel

unit".
32
After working inside
www.dell.com/
Removing the top I/O-panel 63