WARNING:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your
your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Topics:
•
Prerequisites
•
Procedure
Prerequisites
1
Remove the
right-side
cover.
2
Follow the procedure from step 1 to step 2 in
3
Remove the
top
cover.
4
Follow the procedure from step 1 to step 4 in
Procedure
1
Open the securing clip which secures the antenna cable to the chassis.
2
Remove the cables from the routing guide through the slot on the top of the chassis.
3
Note the antenna-cable routing and remove the antenna cables from the routing guides on the chassis.
computer. After working inside your computer, follow the instructions in
"Removing the power-supply
Removing the wireless
Removing the antennas
www.dell.com/
unit".
card.
46
After working inside
Removing the antennas
89