WARNING:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your
your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
CAUTION:
Solid-state drives are fragile. Exercise care when handling the solid-state drive.
CAUTION:
To avoid data loss, do not remove the solid-state drive while the computer is in sleep or on state.
Topics:
•
Prerequisites
•
Procedure
Prerequisites
1
Remove the
right-side
cover.
2
Remove the
full-length graphics card
Procedure
1
Remove the screw that secures the solid-state drive to the system board.
2
Slide and lift the solid-state drive off the system board.
For more information, see
36
Removing the solid-state drive
Removing the solid-state drive
computer. After working inside your computer, follow the instructions in
(if installed).
"System-board
components".
18
After working inside
www.dell.com/