Replacing The System Board; Procedure; Post-Requisites - Dell XPS 8930 Service Manual

WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your
your computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
NOTE: Your computer's Service Tag is stored in the system board. You must enter the Service Tag in the BIOS setup program
after you replace the system board.
NOTE: Replacing the system board removes any changes you have made to the BIOS using the BIOS setup program. You must
make the appropriate changes again after you replace the system board.
Topics:
•

Procedure

•

Post-requisites

Procedure
1 Slide the I/O ports on the system board into the slots on the chassis and align the screw holes on the system board with the screw
holes on the chassis.
2 Replace the screws that secure the system board to the chassis.
3 Route and connect the cables that you disconnected from the system board.
For more information, see
Post-requisites
1 Replace the processor.
2 Replace the processor fan and heat sink
3 Replace the wireless card.
4 Replace the solid-state drive.
5 Replace the graphics card.
6 Replace the memory modules.
7 Follow the procedure from step 9 to step 10 in
8 Replace the right-side cover.
computer. After working inside your computer, follow the instructions in
"System-board components."
assembly.
"Replacing the power-supply

Replacing the system board

unit".
49
After working inside
www.dell.com/
Replacing the system board 95