Denso BHT-1260BWB-CE User Manual page 74

BHT-1200 Series
Remote Display Application
The Remote Display Application is a tool that displays a BHT screen on a computer and manipulates the
BHT via network.
respectively on the BHT and the host computer in order to manipulate the BHT remotely.
BHT : Remote Display Application
PC : Remote Display Utility
Remote Display Application CERDISP.exe
Follow the steps below to run the Remote Display Application on the BHT.
1. Tap the "Desktop > Start > Run... , [Run]" in the Start menu
2. Enter "cerdisp" in the Run dialog (fig.1) then tap the "OK" button.
3. Tap the "Start" button in the start confirmation dialog (fig.2).
The desktop shown in fig.3 is displayed after the application is launched.
To skip the start confirmation dialog (fig.2), enter "cerdisp -c" in the Run dialog (fig.1) instead of "cerdisp".
Run dialog (fig.1)
Remote Display Utility
Follow the steps below to run the Remote Display Utility on the computer.
1. Copy the "cerhost.exe" which comes with the SDK(SDK\Tools\CERHOST folder) to the computer.
2. Run the "cerhost.exe". The Cerhost screen (fig.4) is displayed.
3. Select the "Connect..." from the "file" menu. The connect dialog (fig.5) is displayed.
4. Select the BHT to connect from the active target device list shown on the connect dialog, then tap the
"OK" button.
The BHT desktop shown in fig.6 is displayed on the computer after the application is launched.
The computer can manipulate the BHT with this BHT desktop.
62
The following application files "CERDISP.exe" and "CERHOST.exe" must be run
CERDISP.exe
CERHOST.exe
Start confirmation dialog (fig.2)
CERHOST.exe
Cerhost screen (fig.4)
Desktop after the cerdisp
Connect dialog (fig.5)
is launched (fig.3)
BHT desktop (fig.6)