Outline - SMC Networks LEC-W2-U Operation Manual

2. Outline

The communication cable (LEC-W2A-C) is used to connect the electric actuator controller (LECP series,
LECA series, JXC□1 series) and PC and helps communication between those devices using the controller
setting software (ACT Controller).
Product specifications
Applicable controllers
Applicable USB cables
OS
Operating
environment
Communication interface
Controller
*1) Do not connect the cable to devices other than the applicable controllers.
When connecting the communication cable to the JXC□1 series, use a conversion cable.
Conversion cable No.: P5062-5
*2) Prepare a USB cable (A-miniB) LEC-W2-U to connect the communication cable and PC separately.
The communication setting cable (LEC-W2A-C) is a dedicated cable for the applicable controllers.
- The cable connected to the controllers is different from the LAN cable. Therefore, if the communication
cable is connected to the LAN connector, the LAN connector might be broken.
- For the LECP and LECA series, connect the communication cable to the communication connector
(CN4).
- For the JXC□1 series, connect the communication cable to the communication connector (SI) via a
conversion cable (P5062-5). (It is not possible to directly connect the communication cable to the
communication connector).
LECP6, LECA6, LECPA, LECPMJ
JXC□1
LEC-W2-U
Windows®10, Windows®8.1, Windows®7
USB1.1 or USB2.0 port
Communication cable
LEC-W2A-C
Electric actuator
Caution
*1)
*2)
USB cable
*2)
LEC-W2-U
- Controller setting software (ACT Controller)
- USB driver
Please download from SMC website.
https://www.smcworld.com
-4-
PC
No.JXC※-OMX0002