Turning Off The Es80 - Simrad ES80 Reference Manual

Simrad ES80 Reference Manual
In this context, the phrase channel is used as a common term to identify the
combination of transceiver, transducer and operating frequency.
3 Close the dialog box.

Turning off the ES80

You must NEVER turn off the ES80 by means of the on/off switch on the Processor Unit.
You can close the ES80 program by selecting
Context
When you do not use the ES80, turn off the display and the Processor Unit. If you are
not using the ES80 for a long period of time, we recommend that you turn off the Wide
Band Transceiver (WBT). Use the on/off switch on the power supply, or disengage
the circuit breakers.
Procedure
1 Select on the top bar.
Exit
Observe that the ES80 program closes down.
2 If the Processor Unit does not turn itself off automatically, use the functionality
provided by the operating system to turn it off manually.
3 Turn off the display.
If required, refer to the instructions provided by the display manufacturer.
4 Turn off each Wide Band Transceiver (WBT).
The Wide Band Transceiver (WBT) is not fitted with an on/off switch. You can
leave the unit permanently turned on. If you are not using the ES80 for a long
period of time, disconnect the power supply.
38
on the top bar.
Exit
406273/C