Getting Started; Turning On The Ek80 System - Simrad EK80 Quick Start Manual

Simrad EK80 Quick start guide

Getting started

Topics
Turning on the EK80 system, page 14
Starting normal operation, page 15
Replay data, page 16
Getting to know the user interface, page 18
Record data, page 20
Turning off the EK80 system, page 21

Turning on the EK80 system

In order to use the EK80 system, you must first turn it on. When the system is turned on you
can start normal operation, replay data, record data and explore all functionality provided.
Prerequisites
• The EK80 Scientific wide band echo sounder system units have all been installed
according to the instructions in the EK80 Installation manual.
Caution
You must never set the system to "ping" unless the transducer is submerged in water. Most
transducers are damaged beyond repair if they transmit in open air. Prevent inadvertent
use of the system whenever a transducer is not submerged.
14
403825/C