Simrad ES80 Reference Manual page 394

Simrad ES80 Reference Manual
Description
The settings allow you to define which port (serial or Ethernet) to use when
Depth Output
exporting depth information. You must specify which datagram format(s) to use. The
ES80 can export the depth information on more than one communication port.
The ES80 can export the depth information on several NMEA datagram formats.
Proprietary formats are also supported. You can export several depth formats
simultaneously, as each of them is handled independently.
Once an output type has been defined, it is listed in the
side of the page. To remove or edit an output type, select it in the
Select to change the settings. Select
Edit
Note
You can not define the communication port parameters here. If you need to adjust these,
you must select
I/O Setup
page is located in the
Setup
Details
Installed Outputs
The
Installed Outputs
currently selected outputs. To remove or
edit an output type, select it in the
box.
Outputs
• Select
Remove
• Select to change the settings.
Edit
• Select to add a new output.
New
Output
Select which datagram format to export.
Output Destination
You can export the data on a
communication port (serial or LAN) on
the Processor Unit.
• : Select
Port
your Processor Unit. Select which serial or LAN port to use for the output data.
•
Inspect Port
select
Inspect Port
setup dialog box opens. You are not permitted to make any changes.
You can not define the communication port parameters here. If you need to
adjust these, you must select
parameters. The
boxes.
392
after you have defined the data output parameters. The
and
Installation
box lists all the
Installed
to delete the output.
if you wish to send the information to a communication port on
Port
: Once you have selected a serial or Ethernet communication port,
to inspect the current port parameters. The relevant port
I/O Setup
page is located in the
I/O Setup
Installed Outputs
to delete the output.
Remove
dialog boxes.
Output
after you have defined the data output
Installation
box on the left
box.
Installed Outputs
I/O
and dialog
Output
406273/C