Lifting The Machine With A Forklift - Genie GS-4655 Operator's Manual

First Edition • First Printing
Observe and Obey:

Only qualified riggers should rig and lift the
machine.

Only qualified forklift operators should lift the
machine with a forklift.

Be sure the crane capacity, loading surfaces
and straps or lines are sufficient to withstand
the machine weight. See the serial label for the
machine weight.
Part No. 1294977GT
Transport and Lifting Instructions

Lifting the Machine with a Forklift

Be sure the extension deck, controls and
component trays are secure. Remove all loose
items on the machine.
Fully lower the platform. The platform must remain
lowered during all loading and transport
procedures.
Use the forklift pockets located on both sides of the
ladder.
Position the forklift forks in position with the forklift
pockets.
Drive forward to the full extent of the forks.
Raise the machine 0.4 m and then tilt the forks
back slightly to keep the machine secure.
Be sure the machine is level when lowering the
forks.
NOTICE
™
GS -4655
Operator's Manual
Lifting the machine from the
front or rear can result in
component damage.
47