Genie GS-4655 Operator's Manual page 15

First Edition • First Printing
Do not depend on the tilt alarm as a level indicator.
The tilt alarm sounds on the chassis only when the
machine is on a severe slope.
If the tilt alarm sounds:
Lower the platform. Move the machine to a firm,
level surface. If the tilt alarm sounds when the
platform is raised, use extreme caution to lower the
platform.
Do not drive over 0.8 km/h with the platform raised.
Outdoor Use: Do not raise the boom when wind
speeds may exceed 12.5 m/s. If wind speeds
exceed 12.5 m/s when the boom is raised, lower
the boom and do not continue to operate the
machine.
Do not operate the machine outdoors with the
indoor use button selected.
Indoor Use: When raising the platform, follow
ratings for allowable side force and number of
occupants on the next page.
Part No. 1294977GT
Do not raise the platform
unless the machine is on
a firm, level surface.
GS
Work Area Safety
Do not drive the machine on or near uneven terrain,
unstable surfaces or other hazardous conditions
with the platform raised.
Do not use the machine as a crane.
Do not push the machine or other objects with the
platform.
Do not contact adjacent structures with the
platform.
Do not tie the platform to adjacent structures.
Do not place loads outside the platform perimeter.
Do not operate the machine with the chassis trays
open.
™
-4655
Operator's Manual
Do not operate the
machine in strong or
gusty winds. Do not
increase the surface area
of the platform or the
load. Increasing the area
exposed to the wind will
decrease machine
stability.
Use extreme care and
slow speeds while driving
the machine in the
stowed position across
uneven terrain, debris,
unstable or slippery
surfaces and near holes
and drop-offs.
13