How To Fold Down The Guardrails; How To Raise The Guardrails - Genie GS-4655 Operator's Manual

Operator's Manual
Operating Instructions

How to Fold Down the Guardrails

The platform railing system consists of three fold
down rail sections for the extension deck and three
sections for the main deck. All six sections are held
in place by four wire lock pins.
Note: To assist in the removal and replacement of
the wire lock pins, pull or push back on the railing
to compress the rubber bumpers.
1 Fully lower the platform and retract the
platform extension.
2 Remove the platform controls.
Fall hazard. Use caution and maintain a firm
footing on the platform floor at all times while
folding the guard rails.
3 From inside the platform, remove the two front
wire lock pins.
Keep hands free of pinch points.
4 Fold the front rail assembly to left side. Keep
hands clear of pinch points.
5 Replace the two removed pins back into each
side rail bracket.
42
6 Fold down left side rail assembly. Keep hands
clear of pinch points.
7 Fold down right side rail assembly. Keep
hands clear of pinch points.
8 At the rear of the main deck, remove the two
wire lock pins.
Keep hands free of pinch points.
9 Fold down the rear gate and entry side rails as
one unit. Keep hands clear of pinch points.
10 Fold down left side rail assembly. Keep hands
clear of pinch points.
11 Fold down right side rail assembly. Keep
hands clear of pinch points.
12 Replace the two removed pins back into each
side rail bracket.

How to Raise the Guardrails

Follow the fold down instructions but in reverse
order, ensuring all lock pins are in place and
installed properly.
™
GS -4655
First Edition • First Printing
Part No. 1294977GT