Operator's Manual
Transport and Lifting Instructions
Lifting Instructions
Fully lower the platform. Be sure the extension
deck, controls and component trays are secure.
Remove all loose items on the machine.
Determine the center of gravity of your machine
using the table and the picture on this page.
Attach the rigging only to the designated lifting
points on the machine. There are two 4.4 cm holes
on the front of the machine and two holes in the
ladder for lifting.
Adjust the rigging to prevent damage to the
machine and to keep the machine level.
Center of Gravity Table
Model
GS-4655
48
X Axis
Y Axis
110.7 cm
94.4 cm
1
2
™
GS
-4655
First Edition • First Printing
2
1
X Axis
Y Axis
Part No. 1294977GT