Step 3: Connecting The Vcr - Sony SLV-SE10EG Operating Instructions Manual

Step 3
Connecting the VCR
If your TV has a EURO-AV connector, see page 8.
If your TV does not have a EURO-AV (Scart)
connector
Mains lead
to mains
: Signal flow
1
Disconnect the aerial cable from your TV
and connect it to AERIAL IN on the rear
panel of the VCR.
2
Connect AERIAL OUT of the VCR and
the aerial input of your TV using the
supplied aerial cable.
3
Connect the mains lead to the mains.
Note
• When you connect the VCR and your TV only with an aerial cable, you have to set
RF MODULATOR in the OPTIONS-2 menu to ON (initial setting) (see page 45).
AERIAL IN
AERIAL OUT
Aerial cable (supplied)
AERIAL IN
AERIAL
ANTENNE
IN
ENTREE
OUT
SORTIE
AERIAL
ANTENNE
IN
ENTREE
OUT
SORTIE
continued
Getting Started
7