Sony SLV-SE10EG Operating Instructions Manual page 41

Notes
• If you begin recording a programme "D" from the middle of a previously recorded
programme "A" and into another previously recorded programme "B," the Smart
Search information for the second programme "B" which is recorded over is
deleted.
Originally recorded programmes
A
Recording the programme "D" over the programme "A" and "B"
A D
• You cannot use this function unless the clock is set.
• Depending on the tape, the total or remaining time may not appear correctly.
• When recording a short programme (less than 10 minutes), the Smart Search
function may not be available or the programme information may not appear. Also,
if you record a long programme directly after a short programme, the Smart Search
information for the short programme may be deleted.
• Blank space is measured from the end of the last recorded programme to the end of
the tape. However, if you eject the tape then make a new recording on the same
tape, the original recorded programme(s) is displayed as a blank space.
• If no information is stored in the VCR's memory, LATEST DATA does not appear in
the SMART SEARCH screen.
B C
C
Additional Operations
41