Step 4: Tuning Your Tv To The Vcr - Sony SLV-SE10EG Operating Instructions Manual

Step 4
Tuning your TV to the VCR
If you have connected the VCR to your TV using the EURO-AV cable,
skip this step.
1
ON/STANDBY
2
RF CHANNEL
3
4
RF CHANNEL
10
Getting Started
I/u ON/STANDBY
PROGRAM +/–
Press I/u ON/STANDBY to turn on the VCR.
Press RF CHANNEL on the VCR lightly.
The factory-preset RF channel appears in the display window.
The VCR signal is output through this channel to the TV.
Turn on your TV and select a programme position for the VCR
picture.
This programme position will now be referred to as the video
channel.
Press RF CHANNEL.
The TV system appears in the display window.
RF CHANNEL