Sony SLV-SE10EG Operating Instructions Manual page 40

Searching using the Smart Search function (continued)
To stop searching
Press p STOP.
To exit the SMART SEARCH screen
Press SMART SEARCH.
To record in a blank space
Blank space on the tape will appear as a blank row in the SMART SEARCH
screen. Select the blank row in step 3, then press OK. The VCR rewinds/
fast-forwards the tape to the beginning of the blank space, then stops. Start
recording.
To recall the latest data screen after you remove the
tape
You can display the data of the last tape used to record a programme, even
after you have removed the tape.
If you reinsert the tape and record additional programmes, be sure to select
LATEST DATA. Otherwise, all of the data for the tape is deleted.
1
Reinsert the last tape that you used to record a programme.
2
Press SMART SEARCH.
3
Press >/. to highlight LATEST DATA.
If you want to reset the latest data screen,
highlight NO DATA and press OK, then
record a programme.
4
Press OK.
The latest data stored in the VCR's
memory is displayed.
Tips
• You can store information for up to 24 programmes on a single list.
• While recording, you can display the SMART SEARCH screen using the
SMART SEARCH button. If you decide to stop recording, press SMART SEARCH to
make the SMART SEARCH screen disappear first. Then press p STOP.
40
Additional Operations
SMART SEARCH
1 8 0 MIN.
NO DATA
LATEST DATA
SELECT :
SET : OK
EXIT : SMART SEARCH
SMART SEARCH
DATE TIME PROG.
2 8 . 9 1 9 : 0 0 2 0 : 0 0 3 5
2 9 . 9 1 4 : 0 0 1 5 : 0 0 4 2
3 0 . 9 1 4 : 0 0 1 5 : 0 0 4 2
3 0 . 9 2 0 : 0 0 2 1 : 0 0 2 0
NO DATA
LATEST DATA
SELECT :
SET : OK
EXIT : SMART SEARCH