Step 3 : Connecting The Vcr - Sony SLV-SE100K Operating Instructions Manual

Step 3 : Connecting the VCR

If your TV has a Scart (EURO-AV) connector, see page 9.
If your TV does not have a Scart (EURO-AV) connector
Mains lead
to mains
: Signal flow
1
2
3
Note
• When you connect the VCR and your TV only with an aerial cable, you have to tune your TV
to the VCR (see page 11).
8
Connecting the VCR
Disconnect the aerial cable from your
TV and connect it to AERIAL IN on
the rear panel of the VCR.
Connect AERIAL OUT of the VCR
and the aerial input of your TV using
the supplied aerial cable.
Connect the mains lead to the mains.
AERIAL IN
AERIAL OUT
AERIAL IN
Aerial cable (supplied)
ARIAL
ANTNN
ARIAL
ANTNN
IN
NTR
OUT
SORTI
IN
NTR
OUT
SORTI