Step 4 : Tuning Your Tv To The Vcr - Sony SLV-SE100K Operating Instructions Manual

Step 4 : Tuning your TV to the VCR

If your TV has a Scart (EURO-AV) connector, see page 13.
If your TV does not have a Scart (EURO-AV) connector
Follow the steps below so that your TV will properly receive the video signals from
your VCR.
?/1 ON/STANDBY
Press ?/1 ON/STANDBY to turn on the VCR.
1
ONSTAN
2
Press RF CHANNEL on the VCR lightly.
AUTO ST UP
R CANNL
The factory-preset RF channel appears in the display window.
The VCR signal is output through this channel to the TV.
3
Turn on your TV and select a programme position for the VCR picture.
This programme position will now be referred to as the video channel.
4
Press RF CHANNEL.
AUTO ST UP
R CANNL
The TV system appears in the display window.
RF CHANNEL
PROGRAM +/–
continued
Tuning your TV to the VCR
11