Dubbing only desired scenes
– Digital program editing
Erasing the programme you have set
Erase OUT first and then IN from the last
programme.
(1) Turn the SEL/PUSH EXEC dial to select
UNDO, then press the dial.
(2) Turn the SEL/PUSH EXEC dial to select
EXECUTE, then press the dial.
The last set programme mark flashes, then
the setting is cancelled.
To cancel erasing
Select RETURN in step 2, then press the dial.
Erasing all programmes
(1) Select VIDEO EDIT in
settings.
(2) Turn the SEL/PUSH EXEC dial to select
ERASE ALL, then press the dial.
(3) Turn the SEL/PUSH EXEC dial to select
EXECUTE, then press the dial.
All the programme marks flash, then the
settings are cancelled.
To cancel erasing all programmes
Select RETURN in step 3, then press the dial.
To cancel a programme you have set
Press MENU.
The programme is stored in memory until the
tape is ejected.
You cannot set IN and OUT when
•You use a tape that is recorded in other than
Digital8
system.
•The tape has a blank portion.
The total time code may not be displayed
correctly when
•You use a tape that is recorded in other than
Digital8
system.
•There is a blank portion between IN and OUT
on the tape.
When you select PB MODE to
menu settings
You cannot operate the Digital program editing.
60
in the menu
/
in the