Searching With Recording Date - Date Search - Sony GV-D200E Operating Instructions Manual

Searching with recording
date – Date search
You can automatically search for the point where
the recording date changes and start playback
from that point (Date search). Use the Remote
Commander supplied with a Sony digital video
camera recorder for this operation.
For details, refer to the operating instructions of
the digital video camera recorder.
Use this function to check where recording dates
change or to edit the tape at each recording date.
4 7 2001
(1) Press SEARCH MODE on the Remote
Commander repeatedly, until the date search
indicator appears.
The indicator changes as follows:
DATE SEARCH t PHOTO SEARCH t
PHOTO SCAN
(2) When the current position is [b], press .
to search towards [a] or press > to search
towards [c]. Your VCR automatically starts
playback at the point where the date changes.
Each time you press . or >, the VCR
searches for the previous or next date.
1
2
To stop searching
36
Press x.
[a]
SEARCH
MODE
5 7 2001
[b]
DATE 00
SEARCH
DATE 01
SEARCH
31 12 2001
[c]
t
.
>
.
x
t
>